HOW TO USE
Ensure skin is clean and free from all oils and skin residue. Stick the inserts onto the inside of your clothing item.
Put the clothing item on and adjust breasts to desired height and position.
Stick inserts onto skin and press firmly to secure. Tighten garment if possible for best results.
Where should you place the inserts?
Demi Boost Inserts
The inserts should not sit on top of your breasts, but comfortably under, like the padding of a push-up bra. Your nipples should sit at the edge of the insert as this will provide maximum lift.
Ultra Boost Inserts
The inserts should not sit on top of your breast, they should cup the bottom and the sides of your breasts comfortably and properly. Your nipples should sit at the edge of the insert as this will provide maximum lift.
Invisible Lift Inserts
The inserts can be placed where you like as long as they stay hidden under the clothing. Your nipples should sit at the edge of the insert as this will provide maximum lift.
Hand wash only, do not machine wash or put in the dryer. Gently use the pad of your fingertips to wash the adhesive while avoiding contact with your fingernails to prevent damaging the adhesive. Rinse the inserts with warm water to remove any residue. Carefully shake off excess water and press on the insert lightly to squeeze out any remaining water. Allow the inserts to air dry in an area free of dust particles. When the inserts are completely dry, reapply the protective films to prevent dust and lint from adhering to the inserts.
HOW TO REMOVE
Gently peel off the insert starting from the top edge and slowly remove it from your breast. Repeat the same process on the other side. It is recommended to clean BOOMBA inserts immediately after use.